Pearl Ring With Thin 1mm Band

Recently I custom made this pearl ring with a thin 1mm band.

This thin ring is the very definition of dainty and minimalist.

Looking to create a ring with a thin band? Contact us to learn more.

1mm Band, Too Thin?

This ring was made with a 1X1 millimeter design.

That means that it is both 1mm wide and 1mm thick.

While it is possible to craft such a delicate ring, it can come with it’s drawbacks.

If you are a person that is extra hard on their rings, then a 1mm option would probably not be the best decision.

1mm is also not recommended for rings with larger stones, or in engagement rings.

In this particular instance, the 1mm band works quite well.

The center pearl size is only around 2mm in size, so there is virtually no weight to it. The thin band has no trouble supporting the stone.

The 1mm ring is also thin enough that it does a great job conveying that extra delicate look.

At Modern Goldsmith, we source our raw materials from a distributor that has been certified by SCS Global Services.

This means you can have full confidence that the jewelry we make is sourced from 100% recycled metals.

There has already been enough gold, platinum, and palladium mined in our history to allow plenty of excess through recycled alloys.

There’s no reason for us to continue many of the mining practices that not only damage the earth, but also hurt the laborer in the process.

To learn more about our custom process, feel free to visit our customization page.